ติดต่อรับข้อมูลข่าวสารได้ตามช่องทางนี้
.png)
LAS-AMCO2-30WC automatic metal dome laser cutting machine mainly used in high-speed automatic cutting of metal dome film, often called keypad film cutting machine or film-switch cutting machine, has the following advantages:
1.high-presition:adopts co2 laser, cutting more sophisticated,faster, higher accuracy.
2.full automation: automatic 24 hours of continuous work without man, as long as the operator put the original materials
into the Feed pan; it will be automatic feed,automatic cutting,automatic receiving feed, automatic stop and warning when no materials feed.
3.high stability: it's equipped a laser scanning head cooling system , avoiding a galvanometer scanning system because of the temperature drift to cause instability of marking location accuracy.
4.high efficiency:feed system adopts high-precision servo motor imported from Japan, feed faster, higher-accuracy feed.
5. Dual-channel ventilation system: make sure that the harmful gases can be exhausted to outside.
Specifications LAS-AMC02-30WC
Item
|
LAS-AMC02-30WC
|
Max. laser average power |
30W |
Laser peak value power |
200W |
Laser wavelength |
1064nm |
Max.single pulse energy |
20KHz |
Pulse width |
Imported |
Welding frequency |
7000mm/s |
Pump source |
102mm × 90mm |
Cooling Mode |
±0.15mm |
Focusing regulate |
0.1mm |
Min cutting seam |
0.4mm |
Cutting depth |
±0.003mm |
Positioning |
AHLASER MARKER SYSTEM, Support WINXP |
Cutting accuracy |
≤300mm/s |
Cutting scope |
1.2KW |
Cutting speed |
220V 10%/50Hz/10A |
Power consumpted |
Air-cooled |
Electrical demand |
2300mm × 1050mm × 2100mm |
Usage environment |
2.4m × 1.2m |
Consumable material |
300kg |
Optional accessories |
Clean,no shaking |
บริษัทขอสงวนสิทธิ์ในการปรับปรุงรายละเอียดปลีกย่อยของสินค้า เช่นสี วัสดุที่ใช้ หรือราคาโดยไม่ต้องแจ้งให้ทราบล่วงหน้า โดยการปรับเปลี่ยนจะยึดเอาความต้องการของลูกค้าส่วนใหญ่ และ วัตถุดิบที่มีคุณภาพ มาใช้ทดแทนกัน เป็นที่ตั้ง สินค้าทั้งหมดได้รับการคุ้มครอง ภายใต้กฎหมายว่าด้วยลิขสิทธิ์ ห้ามมิให้บุคคล หรือ นิติบุคคลใดๆ ลอกเลียนแบบการออกแบบ ไม่ว่า ส่วนหนึ่งส่วนใด หรือทั้งหมด หากละเมิด ทางบริษัทจะดำเนินการที่กฎหมายบัญญัติเอาไว้สูงสุด
บริษัท ไอเดีย เมคเกอร์ เทคโนโลยี จำกัด (สำนักงานใหญ่)
1796 -1800 ถ.สุขุมวิท ซ.ตรงข้ามคาร์ฟูร์สำโรง ต.เทพารักษ์ อ.เมือง จ.สมุทรปราการ
ห่างจากสี่แยกบางนาเพียง 5.5 กม.
TEL>> 02-7550290-1 02-7578488-9 01-6298220
ในเวลาทำการ จันทร์-เสาร์ 8.30-17.30น.
กรอกข้อมูลสอบถามด้านล่าง